The Work includes, but is not limited to the following:
 In each of the two (2) sedimentation basins:
o Measuring existing basins and existing equipment, and confirming
equipment to be reused within both sedimentation basins relating
to the sludge collection equipment.
o Demolition, removal and disposal of existing sludge collection
equipment, including longitudinal collectors and cross collectors.
o Furnishing and installing: new sludge collection equipment,
including longitudinal collectors and cross collectors; stainless
steel access stairways; and drain valves.
o Resurfacing concrete launders.
 Demolition, removal and disposal of existing clearwell piping and valves
and existing chemical feed system equipment and piping.
 Capture and disposal of residual chemical products and flush water from
chemical systems including calcium thiosulfate, EarthTec (copper sulfate
pentahydrate), caustic soda, hydrofluorosilicic acid, liquid alum, non-ionic
polymer, and cationic polymer. See Appendix D for expected residual
product volumes remaining in each chemical system and location for
disposal. Work shall be completed in accordance with all applicable state
and federal regulations.
 Furnishing and installing: an above-ground bypass piping system at the
clearwell; new clearwell piping; and new chemical feed system equipment
and tubing.

 Spot repairs of coating on clearwell piping.
 Testing, startup, and commissioning of new equipment.
 Providing training to CCWD staff for new equipment.

Project is to be completed within (610) consecutive days